Airlinkplus APSUSB2 Guia do Utilizador

About This Guide i Fast Ethernet Print Server 2 Parallel, 1 USB Hardware User’s Guide Rev. 01 (October, 2002)

The actual component tests immediately follow the LED tests. A normal (no fault) result is signaled by a simultaneous flashing of these three LEDs,

A 3 PRODUCT SPECIFICATIONS Printer Connection Standards: IEEE 1284 bi-directional parallel interface USB 1.1 Ports: Bi-directional 25-pin parallel

Network Protocols Ethernet Frame Types: 802.2, 802.3, Ethernet II, SNAP (auto- switching) Transport Protocols: TCP/IP, NetBEUI, AppleTalk/EtherTalk

B 4 PORT PINOUTS This appendix shows the pinouts of the Print Server parallel port connector. Parallel Ports The following table lists the pinouts o

ii About This Guide Wichtige Sicherheitshinweise 1. Bitte lesen Sie sich diese Hinweise sorgfältig durch. 2. Heben Sie diese Anleitung für den spät

About This Guide iii Trademarks Copyright  2000 Contents subject to change without prior notice. All trademarks belong to their respective proprieto

iv About This Guide Network Cable Connector...9 DC Power Connector...

1 1 INTRODUCTION The Print Server is a compact print server which connects to your Ethernet or Fast Ethernet network anywhere you wish to locate pri

NetWare 5.x NDPS LPR Remote Printing ♦ NetBEUI Windows NT/2000/XP, Windows 95/98/Me, Windows for Workgroups, Microsoft LAN Manager, IBM LAN Ser

Network Cable Connector The Print Server’s rear panel features an RJ-45 connector for connection to 10Base-T Ethernet cabling or 100Base-TX Fast Eth

2 2 UNPACKING AND INSTALLATION This chapter explains how to install your Print Server and connect it to the network. It also describes the print s

Installing the Print Server WARNING: Configuration problems may result if the Print Server is powered up without first establishing its network con